RØDE Wireless GO II Announced – Now a Dual Channel System

Thảo luận trong 'ENGLISH' bắt đầu bởi Olaf von Voss, 24/2/21.

Lượt xem: 117

  1. Australian audio specialist RØDE has just announced a successor to its ever-popular Wireless GO system. The new RØDE Wireless GO II honors its name, since the receiver now communicates not only with one, but with two individual transmitters.

    Back in 2019, the original Wireless GO system was a huge success, as it was one of the most affordable, easy-to-use, plug’n’play 2.4GHz digital wireless audio systems out there at the time.

    YouTubers and other professionals jumped on the RØDE bandwagon, but one thing remained a desire: connecting two audio sources to the receiver instead of just one. With the new Wireless GO II, you can do just that: Feed two individual (mono) sources or a combined stereo signal into just one transmitter.

    [​IMG]
    RØDE Wireless GO II – Now with two transmitters. Image credit: RØDE

    To be clear right from the start: The RØDE Wireless GO II system is a completely new product. Although they look very similar, unfortunately you can not upgrade the original.


    The above video gives you a nice overview of all the new features.

    RØDE Wireless GO II – II as in two transmitters


    On first look, not much has changed: The form factor is the same, the units are still very compact and lightweight (receiver: 32g / transmitter: 31g), the transmitter still features an onboard omnidirectional mic – no external lav mics needed for minimal clutter. Both, transmitter and receiver still come with internal batterie which can be charged via USB-C.

    [​IMG]
    image credit: RØDE

    So what’s new then? Well, here’s a list to get you started:

    • Dual channel wireless microphone system – record two sound sources simultaneously or use as a single channel wireless microphone
    • All-new Series IV 2.4GHz digital transmission with 128-bit encryption – delivers an extended range of up to 200m (line of sight), optimised for extremely stable operation in dense RF environments
    • 3.5mm analog TRS output, USB-C and iOS digital audio output – universal compatibility with cameras, mobile devices and computers
    • On-board recording capability – record over 24 hours of audio direct to each transmitter as a failsafe against dropouts and other audio issues
    • Ability to switch between mono or stereo recording modes – record each channel separately or combine them for ultimate flexibility in post-production
    • Flexible gain control – three-stage pad, expandable to 10-stage pad
    • Safety channel – records a second channel at -20dB as a backup in case the main channel distorts
    • Complete control over all features and functions via the RØDE Central app
    • In-built rechargeable lithium-ion batteries – up to 7 hours battery life, plus a power saver mode
    Dual channel wireless audio


    This is probably the most remarkable (and most requested) improvement. The Wireless GO II system now consists of two transmitters and one receiver. You can either record two individual audio channels with only one (two-channel) receiver, or combine both incoming channels into one stereo channel for recording on downstream cameras/recorders.

    Each transmitter can also record its own audio channel internally, very handy for fail-safe recordings or as a backup when you are working in RF-heavy environments.

    [​IMG]
    Image credit: RØDE

    Furthermore, the 2.4GHz digital tranmission has been updated to “Series IV” performance, resulting in an extended range of up to 200m (line of sight). This is good news, as with digital transmission you don’t just get a slightly distorted signal once the connection is disturbed, but no signal at all. The magic of ones and zeros…

    The transmission is secured via 128-bit encryption. Both transmitters come pre-linked to the receiver out of the box, so you should be up and running in just a few minutes.

    More features


    All these features are not exactly revolutionary, but rather evolutionary, which I think is a good thing. All the quirks of the original version have been fixed with the RØDE Wireless GO II system. As the company puts it:


    The Wireless GO II is a huge leap forward in terms of useability and versatility, while retaining all the elements that made the first edition such a success. It represents RØDE’s mission to innovate and continue evolving our product lines, always with creators in mind. The Wireless GO II is once again going to change the way people record audio for their content.

    RØDE press release​

    A 3.5mm jack output on the receiver can be connected to a downstream camera (a flat cable is included), but you can also connect a PC, Android phone, or iOS device via a USB-C port. No intermediate devices are needed, just simple plug’n’play audio recording.

    [​IMG]
    Image credit: RØDE

    As a nice touch you can record a second “safety” channel at -20dB, just in case audio levels get too hot while recording (compressed: upt to 24hrs, uncompressed: up to 7hrs, no SD card needed). Very handy. Speaking of controlling input levels: A three-stage pad in in place which can be extended to a whooping 10 stages.

    The built-in lithium-ion battery should be good for around 7 hours and the also offer a power saver mode.

    RØDE Central app


    This new app gives you complete control over your RØDE-branded devices. Not only the new Wireless GO II but also other gear such as the VideoMic NTG or the AI-1. The app is needed to enable features like on-board recording for the Wireless GO II transmitters or the extended 10-stage pad.


    RØDE Central app is also used to offload the internal recordings from the transmitters. Using the app, you can playback, tweak and export the internal recordings to your computer. The app is also used to update your devices firmware. It is available for both Microsoft Windows and macOS.

    [​IMG]
    Rode Central App. Image credit: RØDE
    Pricing and availability


    The new RØDE Wireless GO II system is available now. It sells for $299, which is quite a bit more expensive than the original Wireless GO but you get one extra transmitter so I think this a pretty fair price for what you get. A bag, all necessary cables and a set of furry windshilds (with a new and improved locking mechanism) are included. External lav mics are of course optional.

    Link: RØDE website

    What do you think? Do you have a set of Wireless GO already? Do you think this is worth the upgrade? Share your experiences in the comments below!

    The post RØDE Wireless GO II Announced – Now a Dual Channel System appeared first on CineD.