The Vazen 65mm T2 1.8x Anamorphic lens for Micro Four Thirds format is finally here, completing the trio of Micro Four Thirds, owner-op priced anamorphic lenses. Micro Four Thirds Set It was back in June 2019 when Vazen initially announced three anamorphic lenses for the Micro Four Thirds format. Now, some 18 months later, the trio is complete. The 65mm T2 1.8x is the longest in focal length of the three. Let’s take a closer look. Features This lens is most similar to the Vazen 40mm – near identical size, not too much weight difference at 1.68 kg (3.70 lbs.), both T2-T16, 95mm front diameter (the 28mm is much smaller). The most notable difference of the 65mm is the extended minimum focus distance (MFD) – 1.09m/ 3.6 feet (40mm is 0.82m/2.7 feet) – however this is normal for a lens of a longer focal length. For MFD comparison of other anamorphic lenses in a same focal length class: the Kowa P+S 75mm is 1m/3’ and the Orion 65mm is 0.8m/2.5’ (both Super35mm format). 65mm and 40mm similar in size, 28mm much smaller. Image credit: Vazen Filtration compatibility is as expected – 95mm front diameter with a 86mm internal thread. 0.8 mod gears are featured on both focus and aperture rings. Specification Focal Length: 65mm Min. Focus: 3.6′ (1.09 m) T-stop range: T/2 – T/16 Front Diameter: 95mm Filter Thread: 86mm (can be stepped up to 95mm via Vazen step-up ring) Weight: 1.68 kg Dimensions: 18.5 cm x 10.5 cm (7.28″ x 4.13″) Mount: Micro Four Thirds (M43) 1.8x Squeeze Design As with all previous Vazen anamorphics (both their other two Micro Four Thirds and their Full Frame line), the Vazen 65mm T2 features a 1.8x squeeze design. 4:3 sensor modes are fairly common within the MFT format, which when coupled with a 1.8x anamorphic squeeze, will yield familiar results. The 1.8x crop on a 4:3 sensor plane gives you a circa 2.39:1 aspect ratio. This is an aspect ratio that we have become accustomed to over the years with traditional cinema formats. The 1.8x crop on a 16:9 sensor gives you an overly rectangular final format; your image is much wider than perhaps one is used to. Some like to retain this width, but more often it is cropped out, therefore reducing resolution. Anamorphic lenses with less of a crop, for example 1.33x, provide the same sort of aspect ratio but on a 16:9 sensor. Whilst this addresses the final output format, it does so in a way that offers less anamorphic squeeze, therefore lessening the aesthetic effect of the final image (e.g areas of out of focus are less oval). “Vazen chose to adopt a 1.8x squeeze design to balance the anamorphic characters as well as the resolution of the image. The 1.8x produces a stronger anamorphic character than 1.33x / 1.5x anamorphic lenses” Vazen PR Release It is therefore deemed by Vazen that a 1.8x squeeze design offers the most amount of balance (anamorphic aesthetic vs. resolution). Pricing & Availability The Vazen 65mm T2 1.8x Anamorphic is priced the same as the 40mm, $3250 when purchased individually. According to Vazen, it is available to ship immediately. Have you been using any Vazen anamorphic lenses in your productions? Were you happy with the overall image quality? Please share your thoughts with us in the comment section below. The post Vazen 65mm T/2 1.8x Anamorphic Lens for MFT Announced appeared first on CineD.