Last month, DIGITALFOTO has announced the launch of a new small RGB LED light: the DIGITALFOTO Tree Frog. This pocket-sized fixture can go from 2500K to 8500K and it has a full 360° HSI mode so you can reproduce nearly every color you wish. The casing is IP67 waterproof rated, and the back of the case is magnetic which is very handy for an accent light. Let’s take a closer look at it! DIGITALFOTO Tree Frog – Similarities Let’s start by saying that the DIGITALFOTO Tree Frog looks very similar to other fixtures on the market, like the SANDMARC ProLight, the Boling P1, the GODOX M1, and so on. There’s nothing wrong with similarities between the DIGITALFOTO version and other ones. The Tree Frog on the left, the GODOX M1 on the top right corner, and the Boling P1. I have the GODOX M1 in my camera bag, and it is a nice little accent light that can add a last-minute small punch of color in the background of your scene. The Tree Frog has a lot of similarities with other pocket-sized RGB lights, including: CCT mode: a 2500 to 8500K color temperature range with a CRI and TLCI of 97. In RGB/HSI mode, you can adjust the hue from 0 to 360°, and the saturation from 0 to 100%. A similar output of around 2000Lux at 0.5m. Image credit: DIGITALFOTO Built-in light effects: 20 on the Tree Frog, 15 on the competitors. There’s a little screen at the back of the fixture that shows you the remaining battery life and all your settings. A USB Type-C port charges the built-in battery (4.000mAh on the Tree Frog vs. 2410mAh on the GODOX M1) and doubles up as a power bank to charge your smartphone. All of the lights are made out of aluminum. However, the Tree Frog has a couple of differences compared to its competitors. Image credit: DIGITALFOTO DIGITALFOTO Tree Frog – Features The Tree Frog is slightly bigger and heavier than the GODOX M1, for example, with dimensions of 156 x 83 x 16mm for a weight of 320g (240g for the M1). The bigger battery takes more space and is heavier, but you’ll have an expanded run time of around 3 hours at full power, according to the company. Image credit: DIGITALFOTO To adjust your settings, the Boling P1 and GODOX M1 uses few buttons and a dial. On the other hand, the DIGITALFOTO Tree Frog uses only buttons, which can be a bit slower, but more precise. Image credit: DIGITALFOTO Also, the Tree Frog is IP67 rated, which means it is dust proof and you can put it underwater at 1m for 30mins. Image credit: DIGITALFOTO And, like the Nanlite PavoTube II 6C that we reviewed, the back of the Tree Frog has built-in magnets so you can hang it on metal surfaces. Talking about mounting options, there are three 1/4″-20 mounting points – two at the bottom and one on the left side – to put it on a tripod/cold shoe adapter. Image credit: DIGITALFOTO Pricing and Availability The DIGITALFOTO Tree Frog is available now for $129.00. The light comes with a lot of accessories, including a carrying case, a mini handheld tripod, a tripod head, a protection cover, one honeycomb grid plus soft light cover, a USB-C cable, a USB-C to USB-A adapter, and one small strap. That’s a lot of included accessories! In terms of comparison, the Boling P1 retails for $139.00, and the GODOX M1 is $129.00 (with a special discount of $79.00 at the moment!). For more information about the Tree Frog, you can visit DIGITALFOTO’s website here. What do you think about the Tree Frog? Do you already have a compact-sized RGB LED light in your backpack? Don’t hesitate to let us know in the comments below! The post DIGITALFOTO Tree Frog IP67 RGB Pocket LED Light Announced appeared first on CineD.
