After my second article about the RØDECaster Pro, a series of tweets initiated by Rob Greenlee suggested that the device should contain 5G to facilitate live audio broadcasting. The idea is obviously to facilitate live remotes with multiple microphones, Aphex realtime audio processing (noise gate/compression/EQ/ducking), virtual carts and more, from anywhere. I disagreed about putting 5G inside of the RØDECaster Pro to prevent obsolescence, and pointed out that live audio streaming from the RØDECaster Pro is already possible via a smartphone or tablet, Android or iOS. 5G is still in its infancy. It’s barely available in any smartphones or tablets yet. There’s a reason why Apple waits at least a year to implement new cellular data technology in its devices: The first generation chips tend to be bad and power inefficient. Why make your US$599 RØDECaster Pro subject to yearly or biannual upgrades when you can use your smartphone to broadcast live? This article documents how to broadcast live audio from your RØDECaster Pro using a smartphone/tablet with cellular data or WiFi, either to contribute to a conventional AM/FM station remotely, or for independent online radio shows from anywhere. Two prior articles about the RØDECaster Pro Here are two prior articles I published on the US$599 RØDECaster Pro (B&H). RØDECaster Pro audio console-first look (November 17, 2018) RØDECaster Pro-an unappreciated gem for LIVE production (December 30, 2018) In this article Stereo vs mono live broadcasting from the RØDECaster Pro Example Android and iOS solution to contribute live to a conventional AM/FM radio station, using your bridge from the RØDECaster Pro to the station Example Android and iOS software/CDN to broadcast live from the RØDECaster Pro for independent online radio shows from anywhere Hardware audio connection to older Android devices which don’t support digital audio connection Hardware audio connection for newer Android devices that do support digital audio connection Hardware audio connection to iOS devices with Lighting port Stereo vs mono live broadcasting from the RØDECaster Pro Whether you are going to contribute to a conventional AM/FM radio station as a live remote, or you are going to broadcast live without a computer via your own independent online radio station, it’s important to understand the situation of broadcasting live in stereo or mono. All of the microphone sources on the RØDECaster Pro are naturally mono anyway. The only elements that potentially might be stereo are the virtual carts that you play from the RØDECaster Pro’s pads (or from a connected computer via USB, but this article is all about how to work without any computer). AM radio Although there were two mutually incompatible stereo AM systems launched in the 1980s, it began to decline due to a lack of compatible receivers (most “AM/FM stereo” radios only receive in stereo on FM). So if your conventional station is AM, you probably don’t care about broadcasting stereo at all. FM radio If you plan to use the RØDECaster Pro to do live remotes doing contribution to an FM station, it will depend whether any of your virtual carts are stereo, and how important that is to your remote broadcast. Your own independent online radio station Online radio stations (including the example I’m going to include ahead in this article) definitely can be true stereo, if that is important for your show. Audio-connection dependent Live broadcasts in true stereo or mono is device-dependent, according to the Android or iOS connection to the RØDECaster Pro, as you will see ahead in this article. Example Android and iOS solution to contribute live to a conventional AM/FM radio station, using your bridge from the RØDECaster Pro to the station. The example solution for this section I am going to use is Cleanfeed, which I have already covered in prior articles, including an audio interview with one of its partners. Although my personal use of Cleanfeed to date has been to record remote interviews with studio quality for later editing, Cleanfeed is also capable of doing live end-to-end contribution to a conventional AM/FM station, in either stereo or mono. For this application, in essence, Cleanfeed substitutes the old-fashioned ISDN connection to the radio station with much higher quality than before, for the cost of a data connection. Cleanfeed is not an app. It uses the browser. On Android, it uses the Chrome browser. On iOS, Cleanfeed uses the Safari app. Either way, the remote connection happens instantly with a click on the invitation link sent by the station to the remote broadcaster via email. Example Android and iOS software/CDN to broadcast live from the RØDECaster Pro for independent online radio shows from anywhere. Since this tweet conversation was initiated by Rob Greenlee, VP of producer relations at Voxnext/Spreaker, I am going to use the example of the free Spreaker Studio app, which is available free for Android and iOS. This free Spreaker Studio app (in addition to recording locally, which is outside the scope of this article) can broadcast live in true stereo to the Spreaker CDN (the Spreaker player can then be embedded onto your website, and you can also purchase your show’s branded app for listeners to tune-in on Android or iOS). As of publication time of this article, the free Spreaker plan offers 15 minutes before having to reinitiate the broadcast. Click here to see the pricing for longer-duration live broadcasting, including 45-minutes continuous, 3-hours continuous, 5-hours continuous or 24/7 (unlimited). Spreaker is only one example. There are other software and CDN platforms for Android and iOS to broadcast live for independent online radio shows from anywhere. I used Spreaker as an example out of respect that the initial conversation was from Rob Greenlee. Hardware audio connection to older Android devices which don’t support digital audio connection If you want to use an older Android phone that doesn’t support digital USB audio, you may use the ≈US$30 iRig 2 from our Italian friends at IK Multimedia (Amazon — B&H). Remember that the audio output of the RØDECaster Pro is line-level, not microphone level. The iRig 2 accepts line-level audio and attenuates it down to the level —and matches the impedance— for the TRRS input on your smartphone/tablet. With TRRS to your smartphone/tablet, even though the TRRS output is stereo, the TRRS input is always mono. The iRig 2 uses the CTIA/AHJ wiring standard for the TRRS plug. As of today, all popular Android devices branded Google Nexus/Pixel, Lenovo, Huawei, HTC, LG, Motorola, Samsung, Sony, Xiaomi and more use this standard (and those iOS devices that still have a TRRS connection do too). If all of your virtual carts are mono anyway, then you only need a single 1/4” TS patch cable to go from either of the line outputs of the RØDECaster Pro to the iRig 2, for example this one (Amazon — B&H). If some of your virtual carts are stereo and you need to combine the left and right channels to be heard completely in mono, you’ll need a Y-cable instead, like this one (Amazon — B&H). Gain-staging from the RØDECaster Pro to the iRig 2 and beyond: Start at the output of the RØDECaster Pro at about 60%. Then adjust the thumbwheel of the iRig 2 until you get a healthy level in your smartphone/tablet. Even though this section is mainly about connecting to an Android phone/tablet that doesn’t support digital USB audio, it can also be used with any Android or iOS device with TRRS, as long as you are okay with a mono connection. Hardware audio connection for newer Android devices that do support digital audio connection The main reason to want to connect digitally isn’t so much because you would hear a difference in audio quality, but to have the option for a true-stereo connection, if that’s important to you. Otherwise, if your Android device has a TRRS port, you might consider the iRig 2 covered in the prior section. Because the RØDECaster Pro’s USB-C connection is class compliant, theoretically it should “just work” using a USB-C cable to the USB port of your Android device. However, there is a possibility that it might not, do to a potential stalemate (especially with the Spreaker Studio app) because of an apparent philosophical clash: According to its specs, the RØDECaster Pro is thankfully 48 kHz (see my 2016 article All audio production & distribution should go 48 kHz), while Spreaker’s live streaming is (per my conversations with two Voxnext executives, one in person and one via email) still locked to 44.1 kHz, in apparent permanent allegiance to the audio CD (Compact Disk) format of 1982. So a direct USB-to-USB connection might work directly, and it might not, depending upon varying factors that I could cover in a completely separate article, but I’ll probably never bother to write. I will test this as soon as I receive my RØDECaster Pro review unit and update this article then, but just in case, the following plan B will definitely work in case it doesn’t work directly with a USB-C cable: Get a ≈US$29 Behringer UCA202 interface (Amazon — B&H). The Behringer UCA202 is class compliant and works with Android USB audio. This will receive the stereo analog outputs from the RØDECaster Pro and digitize them at Spreaker’s vintage sampling rate of 44.1 kHz, without affecting the 48 kHz recording you may be making inside of the RØDECaster Pro. Get an appropriate adapter to connect the USB-A male from the Behringer UCA202 to go into your Android device: If your Android device has a micro USB and is OTG-compliant, be sure to choose an OTG cable like this one (Amazon — B&H). That is essential. On the other hand, if your Android has USB-C, be sure to pick an adapter that goes from USB-A female to USB-C male and passes both power and data like this one (Amazon — B&H) unless one came with your device, as it did with my Google Pixel XL. Get a stereo patch cable that goes from 1/4” TS to RCA (Amazon — B&H). Adjust the output level of the RØDECaster Pro to get a healthy level in your Android device. Hardware audio connection to iOS devices with Lighting port As explained in the prior section, the main reason to want to connect digitally isn’t so much because you would hear a slight difference in audio quality, but to have the option for a true-stereo connection, if that’s important to you. Otherwise, if your iOS device has a TRRS port, and you already own an iRig 2 covered earlier in this article, you could use that. Because the RØDECaster Pro’s USB-C connection is class compliant, theoretically it should “just work” using ≈US$19 USB-C cable to Lightning port directly (unless you have time to waste, I would only get the original one from Apple). However, there is a possibility that it might not, do to a potential stalemate (especially with the Spreaker Studio app) because of an apparent philosophical clash: According to its published specs, the RØDECaster Pro is only 48 kHz (see my 2016 article All audio production & distribution should go 48 kHz), while Spreaker’s live streaming (per my conversations with two Voxnext executives, one in person and the other via email) Spreaker live streaming is still locked to 44.1 kHz, in apparent permanent allegiance to the audio CD (Compact Disk) format of 1982. So a direct USB C-to-Lighting connection might work directly, and it might not, depending upon varying factors that I could cover in a completely separate article, but I’ll probably never bother to write. I will test this as soon as I receive my RØDECaster Pro review unit and update this article then, but just in case, the following plan B will definitely work in case it doesn’t work directly with a USB C-to-Lightning connection: Get one US$79 RØDE SC6-L interface (covered in two articles so far, B&H). I just personally verified that the latest Spreaker Studio app for iOS will indeed accept the SC6-L as a digital audio source (as if it were a microphone) and that it indeed treats it properly as stereo as long as you follow these instructions. (The Spreaker Studio for iOS did not accept the SC6-L for playback, but that is not necessary or desired in this setup.) I performed this test using an iPhone SE (the “Miata” of iPhones, now available refurbished and unlocked with warranty for under US$191) using iOS 12.1.2. Get two (2) iRig 2 (covered in more detail earlier in this article, Amazon — B&H). Each iRig 2 will receive one of the two outputs from the RØDECaster Pro and adjust the level and impedance for the two TRRS inputs on the RØDE SC6-L. Get two (2) 1/4” patch cables (Amazon — B&H) that go to connect each iRig 2 to the RØDECaster Pro. One is for each of the stereo channels. Set the free RØDE Reporter app for iOS to tell the hardware that you want it to provide separate channels. This setting will be remembered in the SC6-L interface’s hardware. Adjust the gain on each iRig 2’s potentiometer to get a healthy level on the RØDE Reporter app using its default level settings. Force quit the RØDE Reporter app. Open the Spreaker Studio app and make any fine tuning of the level using the available potentiometers. Save US$20 on Google Fi, my favorite mobile telephony and data service Click here to save US$20 on Google Fi, which now works on iPhone and Android. With Google Fi (covered previously in several articles), there is no extra charge for data-only SIM cards on the same account, for up to 10 devices. You only pay for the total data, and data us free after 6 GB per month. So you could be using one Google FI SIM card on your primary phone, another in a tablet or secondary phone (or third, of fourth…). (Re-)Subscribe for upcoming articles, reviews, radio shows, books and seminars/webinars Stand by for upcoming articles, reviews, and books. Sign up to my free mailing list by clicking here. If you previously subscribed to my bulletins and no longer receive them, you must re-subscribe due to new compliance to GDPR. Most of my current books are at books.AllanTepper.com, and my personal website is AllanTepper.com. Also visit radio.AllanTepper.com. Si deseas suscribirte (o volver a suscribirte) a mi lista en castellano, visita aquí. Si prefieres, puedes suscribirte a ambas listas (castellano e inglés). Suscribe to his BeyondPodcasting show at BeyondPodasting.com. Subscribe to his Tu radio global show at Turadioglobal.com. Subscribe to his Tu salud secreta show at TuSaludSecreta.com. Subscribe to his award-winning CapicúaFM show at CapicúaFM.com. FTC disclosure No manufacturer is specifically paying Allan Tépper or TecnoTur LLC to write this article or the mentioned books. Some of the other manufacturers listed above have contracted Tépper and/or TecnoTur LLC to carry out consulting and/or translations/localizations/transcreations. Many of the manufacturers listed above have sent Allan Tépper review units, including IK Multimedia and RØDE. So far, none of the manufacturers listed above is/are sponsors of the TecnoTur , BeyondPodcasting or TuRadioGlobal programs, although they are welcome to do so, and some are, may be (or may have been) sponsors of ProVideo Coalition magazine. Some links to third parties listed in this article and/or on this web page may indirectly benefit TecnoTur LLC via affiliate programs. Allan Tépper’s opinions are his own. Copyright and use of this article The articles contained in the TecnoTur channel in ProVideo Coalition magazine are copyright Allan Tépper/TecnoTur LLC, except where otherwise attributed. Unauthorized use is prohibited without prior approval, except for short quotes which link back to this page, which are encouraged! The post RØDECaster Pro: How to broadcast live without any computer appeared first on ProVideo Coalition.
